• A new standard for Kinki Zigging.
The compact lever drag jigging reel, the Oceanus, has evolved with the comfort of jigging. 

Ease of use in the field has been further improved by adopting smooth mechanism units and the evolution of the original line guard, widening the frame and spool, and incorporating new mechanisms that are convenient for each part. In addition, left-handed side user long-awaited left handle model was lineup. 

A new standard model that uses the excellent drag performance to boldly attack the greenery of the Asaba, or exploits abundant line capacity to delicately capture mid-deep sea results, and is more widely active in insea water jigging, a new standard model is. 


Oceanos wide HD 5 major features
1 Evolved smooth drag and a more 
detailed preset adjustment that can be missed more finely A large pitch dial of 72 divisions per round, and a step field adjustable drag direct field lag lever, further drag work as expected of the angler It became possible. 

Minimize short cuts, needle stretches, line breaks, and no more missed targets.

The 
original line guard has been evolved to reduce the phenomenon that the line is wound unevenly by the influence of trouble and tidal current and wind with the 2 evolved line guard. By reviewing the structure and shape, the performance to reduce line bias has been further improved, and it has become even more trouble-free. 

Also, if you find it in your way when you put the line into the spool at home, you can now easily remove it.

Wide Line Capacity by 
Widening By widening the frame and spool from Océanos, about 20% of the line capacity is expanded (※ PE1-1200m, 1.2-1000m, 1.5-800m). 
The abundant line capacity can prevent the unexpected situation such as "high line and line shortage" to a certain extent, and by reducing the rate of decrease in diameter of the line wound on the spool when the jig is sunk, There is also an effect of increasing the yield of the amount of winding per rotation of the handle.

High gear specifications that are ideal for 4 slow pitch jerks 
High gear specifications that take up a maximum of 1 m with one rotation of the steering wheel while compact. The optimal gear setting that can easily create the "first speed = trigger" that will be the pitch of slow pitch jerk by the speed of winding, as well as the advantage in high pitch jerk and high speed retrieve. 

5 Equipped with convenient new mechanism in each part 
[Original hook holder] 
 It is possible to hang the jig with hook when moving the point.
[Original line stopper] 
 After fishing, it is possible to hold the tip of the leader when storing it at home.
[Long Power Handle as standard equipment] 
 Powerful support for powerful winding and pitched jerks.
■ Light handle / left handle
Gear ratio7.2: 1 
Practical drag force58.8N / 6.0kgf ※ N (Newton) is a unit that represents force, and 1kg = 9.8N.
Weight (g)545 g 
Maximum winding length (cm)106 cm (cm / 1 handle rotation) 
Number of bearings9 (stainless steel) 
Amount of thread windingPE 1-1200 m, 1.2-1000 m, 1.5-800 m 
price115,000 yen (excluding tax)

PAGE TOP

    Details and features

  • ※ The image is a light handle model.
  • Large diameter stainless steel drive gear / stainless steel pinion gear
    Gear ratio 7.2: 1. The drive gear and pinion gear are both made of high strength and high hardness stainless steel. The gear is hard to break even with hard use, and at the same time high sensitivity is achieved.
  • Smooth drag unit
    [Special-shaped aluminum drag disk] Special-shaped aluminum drag disk 
    coated with special drag grease realizes smooth drag performance from low drag area.
  • [Micro-pitch large-aperture preset dial] 
    Fine presets are possible with a 72-segment micro-pitch large-aperture dial.
  • [Direct Field Rug Lever] 
    Drag lever with enhanced operability by making the part that touches the finger dignified and making the touch stronger. Drag force can be adjusted steplessly by not providing a click mechanism.
  • [Angular contact bearing] In 
    addition to the normal function of the bearing, an angular contact bearing corresponding to thrust (axial direction) load is adopted for the spool shaft. Reduce the winding weight when you tighten the lever drag.
  • Original line guard

    Original line guard
    Line guard to reduce the phenomenon that the line is wound unevenly. Avoid line problems that occur when the diameter of a wound line exceeds the spool diameter. Removable.
  • Forged aluminum body & spool

    Forged aluminum body & spool
    Lightweight, high strength aluminum forged, high rigidity, high durability body & spool. Line capacity increased by approximately 20% by switching 4 mm from the Oceanos.
  • Palm side body cut design

    Palm side body cut design
    Design that cuts the corner of the frame that hits the palm improves the sense of hold. In addition, shape that line slack is hard to be caught at the time of fall.
  • Frame cut design for index finger summing

    Frame cut design for index finger summing
    When using the palm side thumb for drag lever operation, etc., cut the frame so as not to disturb "forefinger thumbing".
  • Two action lock switch

    Two action lock switch
    Corresponds to the root with the spool lock function. Two-action mechanism that can be locked in the off position to prevent malfunction. 
    ※ When operating the lock switch, make the rod and the line as straight as possible, so as not to put a load on the rod. 
    ※ Depending on the strength of the line, the spool shaft etc. may be burdened and may be damaged.
  • Asymmetrical reel foot

    Asymmetrical reel foot
    The position of the reel can be adjusted by 4 mm when changing back and forth. Please adjust according to the size and hand of the hand. 
    ※ We use screw lock agent to prevent slack of screw at the time of shipment. Please be careful when removing it.
  • Original line stopper

    Original line stopper
    Stopper for holding the end of the line. It is located at the center of the body so that it is hard to get wrinkles on the line. 
    ※ Do not pinch anything other than the end of the line. There is a risk that the pinched parts may be damaged or the line stopper may be damaged.
  • Original hook holder

    Original hook holder
    It is possible to hang the jig with a hook when moving points. 
    ※ Please be careful not to damage the reel body or rod with a jig or hook that has been hung.
  • Crank handle arm long

    Crank handle arm long
    Long arm with a total length of 105 mm. By cranking the grip close to the rod to the limit, the shake by retrieve is suppressed.
  • Original handle power grip

    Original handle power grip
    Power grip with a slightly inclined shape that supports long-time winding strongly and comfortably. We adopt anti-slip material in part to grip.
  • Original handle grip shaft

    Original handle grip shaft
    Handle grip shaft with tapered tip and flared tip. The fingertip stops at the flare to prevent injury due to contact with the handle arm.
  • Easy slide handle arm

    Easy slide handle arm
    The length of the handle arm can be easily adjusted without removing the handle according to the field conditions such as jerk pitch. (Adjustable range: 92 mm to 105 mm)
  • Dedicated reel cover

    Dedicated reel cover

Parts list

EVERGREEN OCEANUS WIDE HD

  • Κατασκευαστής: EVER GREEN
  • Κωδικός Προϊόντος: EVERGREEN OCEANUS WIDE HD
  • Διαθεσιμότητα: Διαθέσιμο
  • 1.260,00€


Διαθέσιμες Επιλογές